Potentiometers / Inclinometers　ESC3000Z Series

ESC3000Z Series

Features	Vibration suppression, Zero reset, Various output types, Aluminum die-casting housing, IP67 Splash-Proof, High-Accuracy Tilt Sensors with Current & Digital Outputs
Output	Ratio	Voltage	Current	RS-485
Electrical Tilt Angle	±10°, ±20°, ±30°, ±45°, ±60°, ±80°			±80°
Absolute Linearity	±0.5%FS			–
Input Voltege	5±0.25 VDC	8~30 VDC	24±4 VDC	–
Dimension	W90×D70×H22.5 mm

*If you need something different from our standard models, please contact us.

[Applications]

Seat position testing equipment：Measurement/Seat position

Bulldozer：Control/Body position

Food processing machine：Control/Pich&Roll position

Hole-Digging machine：Control/Drilling bucket position

Part Number Designation

ESC30	10	Z –	R –	DB	0	L	0	0
Series name	X axis analog output Angle 10: ±10° 20: ±20° 30: ±30° 45: ±45° 60: ±60° 80: ±80°	Output axis Z: X & Y (Standard) X: X axis only Y: Y axis only	Output type R: Ratiometric 10-90%Vin V: Voltage 0.5-4.5 V A: Current 4-20 mA	Damper Time Constant^※1 *See table below	Axis Characteristics 0: X & Y Normal (Standard) 1 : X Inverted, Y Normal 2 : X Normal, Y Inverted 3 : X & Y Inverted	Baud rate L: 9600 bps H: 115200 bps	Termination Resistor 0 : None (Standard) 1 : Active	Index Key 0 : Not Supported (Standard) 1 : Supported

※1:

The table below shows the cut-off frequency and time constant corresponding to each damper setting.

※2:

Users can select the optimum damper time constant according to the operating speed and vibration level.

Damper time constant

Part No.	Level	Cut-off frequency	Time constant
D0	0	11.2 Hz	120 ms
D1	1	9.27 Hz	150 ms
D2	2	7.65 Hz	160 ms
D3	3	6.32 Hz	170 ms
D4	4	5.21 Hz	190 ms
D5	5	4.30 Hz	220 ms
D6	6	3.55 Hz	250 ms
D7	7	2.93 Hz	290 ms
D8	8	2.42 Hz	330 ms
D9	9	2.00 Hz	360 ms
DA	10	1.65 Hz	420 ms
DB	11	1.36 Hz	500 ms (Standard)
DC	12	1.21 Hz	590 ms
DD	13	0.92 Hz	700 ms
DE	14	0.76 Hz	810 ms
DF	15	0.62 Hz	970 ms